RS1 M4A Motion Simulator

  • Overview

    RS1 is a new generation simulator build in modular desing. You will be able to upgrade and build your RS1 simulator all the way down from Basic rig up to Full motion. The key features are: RS1 Basic comes with Shifter mount and Seat Sliders included. Accessories: Buttkicker Mount, Tablet/Buttonbox mount, Keyboard and Mouse tray, Speakers Mount (Logitech® Z906 Support) Full motion System with 3 and 4 Actuators, triple stands for up to 3×47 inch tv’s.

    Support

    support-console-pc

    Specification
    • RS1 M4A “D-BOX” system with 4 actuators
    • D-BOX software is Windows PC compatible only
    • D-BOX KAI-1P USB Controller
    • D-BOX ™ motion actuators kit 4250i (4 x Actuators)
    • RS1 D-BOX Adaptor Frame made of cnc laser cutted carbon steel to hold the actuators
    • RS1 Level 2 included (RS1 simulator + all accessories)
    • RS1 M4A comes in 2 color schemes depending the color of the seat and frame
    • Chassis comes in black matte or white matte powder coat paint
    • Max Vertical lift – 35 mm
    • Max Vertical Velocity – ±100 mm./sec
    • Max Vertical Acceleration – ±1g
    • Frequency range – 0 to 100Hz
    • Operating Temperature range – 0 to 30°C
    • Operating Humidity – 10 up to 75 %
    • Maximum lifting capacity (per seating area) – 1000 lb / 455 kg
    • Power requirement (per ACM 120V) – 120 VAC, 60 Hz, 5 A
    • Power requirement (per ACM 230V) – 230VAC 50/60Hz, 5A
    • Footprint dimensions: 1625mm x 800mm x 1255mm (64” x 31.5” x 49.40”)
    • Weight: 140kg (308lbs)
    • Assembly tools and screws provided
    • Available addons: RS STAND T3l, T3Xl (up to 3×42 inch TV’s), T3S (up to 1x 65 inch TV)
    The Seat
    • Seat shell made of composite materials and finished in gloss black.
    • Leather comes in 3 color options (White, Black and Red)
    • RS1 Allow to recline the entire seat ±4°
    • Seat sliders allow to adjust it front-backwards ±90mm (3.54inch)
    • Highly wear resistant suitable for game race centers
    Chassis
    • Made of Laser cut carbon steel and cnc bended round tubes
    • Comes in two color options (Black matte or White matte powder coat paint)
    • Frame step on the ground by 4 adjustable legs (80mm diameter each)
    • Total height (with the seat): 1255 mm (49.40”)
    • Total width: Rear: 800 mm (31.5”)
    • Pedal plate width 350 mm. (13.78”)
    • Pedal plate adjust from full flat up to 60°
    • Whell mounting plate allow to adjust height of the wheel ±8 cm (3.15”)
    • Slide pedals front-backwards ±90mm (3.54inch)
    • Footprint dimensions: 1625mm x 800mm x 1255mm (64” x 31.5” x 49.40”)
    • Weight: 130kg (286lbs)
    Keyboard / Mouse tray
    • Made of laser cut carbon steel and round tubes
    • Fully Adjustable in hight, tilt and possition
    • Direct fitment on RS1 Level 1 chassis
    • Assembly instructions provided
    • Comes in black matte or white matte powder coat paint
    • Keyboard tray dimensions 500 mm. x 205 mm. (19.68” x 8.07”)
    • Mouse tray diameter – 200 mm. (7.87”)
    Tablet / Buttonbox mount
    • Made of laser cut carbon steel and cnc bended round tube
    • Angle and tilt adjustable (both tablet mount and buttonbox mount)
    • Assembly instructions provided
    • Comes in black matte or white matte powder coat paint
    • Direct fitment on RS1 Level 1 chassis
    • Fits most 5″-10.1″ tablets
    • including iPad 2, 3, 4, iPad Mini, Samsung’s tablests, HP’s Touchpad. Acer, Asus, Vizio, Toshiba, Black Berry, Viewsonic’s tablets, etc..
    • Buttonbox mount support to hardmount: DSD Track Boss, DSD Black Max, DSD Black Max II Buttonboxes
    Buttkicker® Mount
    • Made of Laser cut carbon steel and round tubes
    • Comes in two color options (Black matte or White matte powder coat paint)
    • Assembly instructions provided
    • Direct fitment on RS1 Level 1 chassis
    • Support all Buttkicker models including Buttkicker ™ Gamer 2, Pearl ™ THMP1, ButtKicker ™ Simulation Kit, and more..
    Shifter Kit
    • Support Fanatec Clubsport Shifter, Thrustmaster HOTAS Warthog joystick and throttle
    • Made of Laser cut carbon steel and round tubes
    • Comes in two color options (Black matte or White matte powder coat paint)
    • Assembly instructions provided
    • Direct fitment on RS1 basic chassis
    Speakers Mount
    • Made of Laser cut carbon steel
    • Comes in two color options (Black matte or White matte powder coat paint)
    • Assembly instructions provided
    • Direct fitment on RS1 Level 1 chassis
    • Support Logitech® Z906 5.1 sound system. Other Speaker systems with wall mount support can be attached
    Hardware
    • All tools and screws to attach your Wheel, pedals and shifter are provided
    • Detailed assembly instructions
    24×7 Support
    • We provide 24×7 on site support through ticket or live-chat
    • Distributor network allow to have full support in your area
    Warranty
    • 2 year Warranty on all Rseat Manufactured components including chassis and seat
    • Find you local Distributor for Pricing

  • Color Options
    N1 M4A 3000 Motion Simulator comes in 2 color schemes.

Ready to order?

Buy Now